Skip to content

SOLARPLEXIUS
INSTALLATION GUIDE

How to mount Solarplexius tint on your car


VIDEO ABOUT INSTALLATION

Watch the video where you can step by step see how to mount Solarplexius on your car.

Sunshades from Solarplexius are nothing like pre-cut sun film. Solarplexius sun protection is a hard, unbreakable and pre-cut polycarbonate sunshades. You have a finished tinted car in 15 min and the result is always perfect.

SOLARPLEXIUS INSTALLATION – STEP BY STEP

Solarplexius toning er den mest holdbare toningen på markedet for bilvinduene dine.

1. BEFORE ASSEMBLY

Solarplexius tinting is the most durable tinting on the market for your car windows. The result is always perfect. You can also disassemble the screen if necessary, making it very easy to apply Solarplexius tint to your car.


Check that the delivery is not damaged. In case of damage to the packaging, document this with a photograph. Open the package and check that none of the sunshades are damaged.

Vask og tørk bilvinduene forsiktig, bruk gjerne vindusrenser og et ikke-vevd stoff. 

2. WASH AND DRY THE CAR WINDOWS

Carefully wipe the inside of all glass panels on the car, preferably using glass cleaner and a microfiber cloth.. Wipe the protection foil on the Solarplexius sunscreen with a slightly damp cloth to remove dust. To protect the car’s interior from damage / scratches during Solarplexius installation, you can put masking tape on the interior as protection.

Important! Protect the car’s interior
To protect the car’s interior from damage / scratches during Solarplexius installation, you can put masking tape on the interior as protection.

Fjern beskyttelsesfilmen fra solarplexius solskjerming

3. REMOVE THE PROTECTIVE FILM

Use the included gloves to prevent fingerprints and grease stains on the pre-cut sunscreen. Select a window to begin with, then slowly pull off the protection foil to prevent static electricity.

solbeskyttelse som kan bøyes så mye du vil, uten at den ødelegges.

4. START INSTALLING SUN PROTECTION

Note that this is a sunscreen that can be bent as much as you want, without being damaged. Start in the deepest corner of the window, then bend the sunshade into the rest of the window.

No disassembly of the car’s interior is required.

solarplexius plater er uknuselige

5. BEND WITHOUT BREAKING

When mounting the sunshades, they usually need to be slightly bent to get behind the car’s regular interior. Note that our sun protection can be bent as much as you want without breaking.

Do not worry, our Solarplexius sunshades are unbreakable.
Make sure that the sunshades on the windows is centered and that there is no light transmission on the car window

6. INSTALLATION OF CLIPS

After mounting, pull the protective film away from the tape on the supplied plastic clips. Make sure that the sun protection on the window is centered and that there are no light transmissions on the car window. Then slide the flat part of the supplied clips between the sunshades and the interior of the car’s regular interior so that the thicker part of the strip rests against the interior.

The adhesive must be attached to the Solarplexius tint.

On Solarplexius YouTube you will find tips and videos for using Solarplexius sun shades for Volvo, Solarplexius sun protection for BMW and other relevant car models.